Recommended use

Jotun Woodshield Stain is ideal for all kinds of interior untreated hardwood, softwood, plywood, chip board etc. Can also be used as a topcoat for an anti termite and fungal system with Jotun Wood Preserver as undercoat.

The product can be applied by
Roller : Recommended.
Brush : Recommended.
Spray : Use Conventional spray.

Cleaning of painting tools
Use an enamel based thinner (Jotun Thinner No. 2)

Coverage
10.2 sqm / L (for applying 1 coat of varnish)

Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature, wastage during painting etc.

Thinner and Dilution
Use Jotun Thinner No. 2. But maximum 10%

Surface Preparation
The substrate must be clean and dry. Surface contamination is to be removed by thoroughly rubbing down in the direction of the wood grain, using a suitable abrasive paper and dusted off.

Recommended Paint System
Woodshield Stain Interior : 1 - 2 Coat(s) If anti-termite protection is required, use Jotun Woodpreserver as the first coat.

Disclaimer
The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and practical experience. Jotun's products are considered as semi-finished goods and as such, products are often used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product itself.

Colours shown here represent Jotun Woodshield on MERANTI wood.  All colours reproduced are shown as close to actual colours as modern technology allows. Final result varies depending on colour, texture, grain, porosity and type of wood.

Additionally, due to variances among screen settings and different operating systems, the colours that appear on your screen may not be the exact result that achieve. We have tried to minimise the difference to the maximum, but keep this in mind when selecting the colours 😊

 Comparison between Interior & Exterior Wood Varnish.